Zanussi ZDF311S Manuel d'utilisateur télécharger pdf (Page 11)

• The dishwasher must be switched off.

Switch on the dishwasher by pressing the On/Off

button.

•

Press and hold simultaneously function buttons B

and C until the lights of function buttons A , B and

C start flashing.

• Release the buttons and then press function button

A; the lights of function buttons B and C turn off

while function button A goes on flashing. At the

same time End of programme light starts to flash.

The number of flashes of the End of programme

light corresponds to the current level.

•

The End of programme light might flash 5 times,

for example. The flashing is repeated every 5 sec-

onds.

• To change the level, press function button A. Each

time the button is pressed the level increases.

(Level 1 follows level 10).

•

The End of programme light indicates the new

setting. (For the selection of the new level see the

chart).

• To memorise the operation, switch off the dish-

washer by pressing the On/Off button.

Filling with dishwasher salt

CAUTION!

Use only special salt suitable for dishwashers.

Unscrew the cap.

Only before filling with

salt for the first time, fill

the salt container with

water.

Using the funnel provi-

ded, pour in the salt until

the container is filled with

salt.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Pas de commentaire

Zanussi ZDF311S Manuel d'utilisateur Page 11