Zanussi ZWG6141P Manuel d'utilisateur télécharger pdf (Page 17)

Delay Start

The start of the programme can be delayed by 9, 6 or 3 hours

by means of this button. The relevant light illuminates.

You must select this option after you have set the programme

and before you start the programme.

Select a delayed start:

• select the programme and the required options;

• select the delay start by pressing the button 5;

• press the button 6:

– the appliance starts its hourly countdown.

– The programme will start after the selected delay has ex-

pired.

Cancelling the delayed start after having started the

programme:

• set the appliance to PAUSE by pressing the button 6;

• press the button 5 once, the light relevant to the selected

delay goes off;

• press the button 6 again to start the programme.

The DELAY START cannot be selected with the drain pro-

gramme.

Important! The selected delay can be changed only after se-

lecting the washing programme again. The door will be locked

throughout the delay time. If you need to open the door, you

must set the appliance to PAUSE (by pressing the button 6)

and then wait a few minutes. After you have closed the door,

press the button 6 again.

Start/Pause

Start /Pause

Start the programme by pressing the button 6

• To start the selected programme, press the button 6, the

corresponding green pilot light stops flashing. The pilot light

7.1 illuminates to indicate that the appliance starts operat-

ing and the door is locked. If you have chosen a delayed

start, the appliance will begin the countdown.

• To interrupt a programme which is running, press the but-

ton 6: the corresponding green pilot light starts flashing. It

is possible to change some options of a running pro-

gramme before the programme carries them out.

• To restart the programme from the point at which it was in-

terrupted, press the button 6.

www.zanussi.com

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Pas de commentaire

Zanussi ZWG6141P Manuel d'utilisateur Page 17