Zanussi ZWH71246 Manuel d'utilisateur télécharger pdf (Page 25)

ENGLISH 25

TROUBLESHOOTING9.

9.1 Possible Failures

Certain problems are due to lack of

simple maintenance or oversights, which

can be solved easily without calling out an

engineer. Before contacting your local

Service Centre, please check possible

cause of malfunction and solution listed

below.

Once the problem has been eliminated,

press the Start/Pause button to restart the

program. If after all checks, the problem

persists, contact your local Service

Centre.

WARNING! Deactivate the

appliance before you do the checks.

The door has not been closed. (code: )

The plug is not properly inserted in the

power socket.

Insert the plug into the

power socket.

Please check your domestic

electrical installation.

Press the Start/Pause ( )

touchpad.

If the laundry are to be

washed immediately, cancel

the “Delay End”.

Wait until the main supply is

stable. Appliance will start

automatically.

There is no power at the socket.

The Start/Pause ( ) touchpad has not

been pressed.

The “Delay End” has been selected.

The Main supply is unstable.

(If code “ ” appears in the display.)

The inlet hose is squashed or kinked.

(code: )

Check the inlet hose

connection.

The end of the drain hose is too low.

(code: )

Refer to relevant paragraph

in “water drainage” section.

The filter in the inlet hose is blocked.

(code: )

Clean the water inlet hose

filter.

The door is not properly closed. (code: ) Close the door firmly.

The water tap is closed. (code: ) Open the water tap.

The washing

machine does

not start:

The machine

does not fill the

water:

The machine

fills then

empties

immediately:

Malfunction Possible Cause Solution

Close the door firmly.

The drain hose is squashed or kinked.

(code: )

Check the drain hose

connection.

The drain pump is clogged. (code: ) Clean the drain filter.

The machine

does not empty

and/or does

not spin:

The option “Rinse Hold” has been selected.

Press Start/Pause ( )

touchpad to drain the water

or select spin program.

The laundry is not evenly distributed in the

drum.

Pause the machine and

redistribute laundry manually.

The appliance does not fill with water

properly.

The appliance door is open or not

closed correctly. Please check the door!

The appliance does not drain the water.

The main supply is unstable. Wait until

the main supply is stable.

No communication between electronic

elements of the appliance. Switch off

and switch on again.

Water leaks inside the machine.

Please call Service Centre.

Alarm Code:

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Zanussi ZWH71246 Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Zanussi ZWH71246