Zanussi ZWS281 Manuel d'utilisateur télécharger pdf (Page 18)

10. Replace the plastic spacers with the large plastic

caps. You can find these large caps in the user

manual bag.

Warning! Remove all the packaging and the transit

bolts before you install the appliance.

We recommend that you keep the packaging and the

transit bolts for when you move the appliance.

Positioning and levelling

• Install the appliance on a flat hard floor.

• Make sure that carpets do not stop the air circulation

below the appliance.

• Make sure that the appliance does not touch the wall

or other units

• Loosen or tighten the feet to adjust the level. A cor-

rect adjustment of the appliance level prevents the

vibration, noise and the movement of the appliance

when in operation.

• The appliance must be level and stable.

Caution! Do not put cardboard, wood or equivalent

materials below the appliance feet to adjust the

level.

The inlet hose

• Connect the hose to the appliance. Loose the ring

nut to set it in the correct position.

• Connect the water inlet

hose to the cold water

tap with 3/4 thread.

Caution! Make sure that there are no leaks from the

couplings.

Do not use an extension hose if the inlet hose is too

short. Contact the service centre for the replacement

of the inlet hose.

Water drainage

There are different procedures to connect the drain hose:

With the plastic hose guide

1 2 ... 13 14 15 16 17 18 19 20

Pas de commentaire

Zanussi ZWS281 Manuel d'utilisateur Page 18