Zanussi ZDF22002XA Manuel d'utilisateur télécharger pdf (Page 9)

The programme marker must be in position.

1. Press and hold and simultaneously turn the knob counterclockwise until the programme marker is in

position.

2. Release when and Delay start to flash.

3. Turn the knob counterclockwise until the programme marker is in position.

• The indicator is on = AirDry is activated.

4. Press to change the setting.

• The indicator is off = AirDry is deactivated.

5. Turn the knob to to confirm the setting.

CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as

opening the door may pose a danger.

BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the hardness

of the water supply. If not, adjust the level

of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance.

Do not use detergent and do not load the

baskets.

After starting a programme, it may take up to 5

minutes for the appliance to recharge the resin in

the water softener. It seems that the appliance is

not working. The washing phase starts only after

this procedure is completed. The procedure is

repeated periodically.

ADDING SALT

Before the first use, put one litre of water in the salt container.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Pas de commentaire

Zanussi ZDF22002XA Manuel d'utilisateur Page 9