Zanussi PTDF64 Manuel d'utilisateur télécharger pdf (Page 3)

FO 0199

Carry out the building in of the hob as follows:

 put the seals supplied with the hob, on the

edges of the cut out, as shown in the diagram,

taking care that the seals meet without

overlapping;

 place the hob in the cut out, taking care that it

is centred;

 fix the hob with the relevant fixing clamps

and screws, as shown in the diagram. When

the screws have been tightened, the excess

seal can be removed.

The edge of the hob forms a double seal which

prevents the ingress of liquids.

Seal

Fitting the hob to the worktop

FO 2239

1 2 3 4 5 6 7 8 ... 12 13

Pas de commentaire

Zanussi PTDF64 Manuel d'utilisateur Page 3