Zanussi ZCE610X Manuel d'utilisateur télécharger pdf (Page 21)

Removing the oven door (Fig. 13 & 14)

Warning:

It is important that the retaining discs are

fully turned and located as the hinges are

under high sprung tension.

1. Open the door completely so that it is in the

horizontal position.

2. Raise the two bars.

3. Raise the door halfway.

4. At this stage, claps the two hinges on either

side of the door together simultaneously. The

door can then be removed by pulling on and

downwards., maintaining the angle.

Fig. 13

Fig. 14

Replacing the oven door

1. Clasp the two hinges on either side of the

door simultaneously.

2. Hook the top hinge into the top slot, so that

the hook is engaged with the roller.

3. Drop the lower hinge into the lower slot, so

that the notch is engaged. Drop the door

down so it is in the horizontal position.

Note

Is it important when carrying out this

operation, that both hinges be located

simultaneously.

4. Turn the bars.

The door can then be closed.

FO 0417

FO 0967

☞

Oven lamp replacement

Disconnect the appliance.

Unscrew the lamp and substitute it with another

suitable for higher temperature (300°C) having the

following characteristics:

Tension: 230-240V (50Hz)

Power: 15W

Convection: E14

Fig. 15

FO 0424

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

Zanussi ZCE610X Manuel d'utilisateur Page 21