Zanussi ZCI68000BA Manuel d'utilisateur télécharger pdf (Page 10)

To change the time: set the cooking zone

with . Touch or .

To deactivate the function: set the cooking

zone with and touch . The remaining time

counts back to 00. The indicator of the cooking

zone goes out. To deactivate the function you

can also touch and at the same time.

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch .

CountUp Timer (The count up timer)

You can use this function to monitor how long

the cooking zone operates.

To set the cooking zone: touch again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function: touch of the

timer. comes on. When the indicator of the

cooking zone starts to flash slowly the time

counts up. The display switches between

and counted time (minutes).

To see how long the cooking zone

operates: set the cooking zone with . The

indicator of the cooking zone starts to flash

quickly. The display shows how long the zone

operates.

To deactivate the function: set the cooking

zone with

and touch or . The indicator

of the cooking zone goes out.

Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking

zones do not operate (the heat setting display

shows ).

To activate the function: touch . Touch

or of the timer to set the time. Cooking

zones display deactivates automatically after 10

seconds. When the time comes to an end, the

sound operates and 00 flashes.

To stop the sound: touch

.

To deactivate the function: activate for a

short time and deactivate left front cooking

zone.

The function has no effect on the

operation of the cooking zones.

STOP+GO

This function sets all cooking zones that operate

to the lowest heat setting.

The function does not stop the timer functions.

To activate the function: touch

.

comes on.

To deactivate the function: touch . The

previous heat setting comes on.

If you change the heat setting, the

function stops and the display

shows the new heat setting.

Lock

You can lock the sensors on the hob while

cooking zones operate.

Set the heat setting first.

To activate the function: touch

.

comes on for 4 seconds. The Timer stays on.

To deactivate the function: touch

. The

previous heat setting comes on.

When you deactivate the hob, you

also deactivate this function.

The Child Safety Device

This function prevents an accidental operation

of the hob.

To activate the function: the hob must be

deactivated. Touch until flashes. Touch

. comes on for 4 seconds.

To deactivate the function: the hob must be

deactivated. Touch until flashes. Touch

. comes on for 4 seconds.

To override the function for only one

cooking time: activate the cooking zone.

comes on. Touch until comes on. Set

the heat setting in 4 seconds. You can

operate the hob. When you deactivate the

appliance the function operates again.

10 www.zanussi.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Commentaires sur ces manuels

Pas de commentaire