Zanussi ZGF759ICX Manuel d'utilisateur télécharger pdf (Page 11)

FO 2039

FO 0199

Carry out the building in of the hob as follows:

• put the seals supplied with the hob, on the

edges of the cut out: place them exactly on

the front and rear edge and at 50 mm. from

the side edges, as shown in the diagram, taking

care that the seals meet without overlapping;

• place the hob in the cut out, taking care that it

is centred;

• fix the hob with the relevant fixing clamps

and screws, as shown in the diagram. When

the screws have been tightened, the excess

seal can be removed.

The edge of the hob forms a double seal which

prevents the ingress of liquids.

Seal

☞

Fitting the hob to the worktop

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Zanussi ZGF759ICX Manuel d'utilisateur Page 11