Zanussi ZGF982IX Manuel d'utilisateur télécharger pdf (Page 19)

Fitting the Hob into the Worktop

Carry out the building in of the hob as

follows:

1. place the seals supplied with the

hob on the side edges of the cut

out and at 8 mm. from the front

and rear edges, as shown in the

diagram, taking care that the

seals meet without overlapping;

2. place the hob in the cut out,

taking care that it is centred;

3. fix the hob with the relevant fixing

clamps and screws, as shown in

the diagram. When the screws

have been tightened, the excess

seal can be removed.

The edge of the hob forms a double seal

which prevents the ingress of liquids.

Seal

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Pas de commentaire

Zanussi ZGF982IX Manuel d'utilisateur Page 19