Zanussi ZGG659ICX Manuel d'utilisateur télécharger pdf (Page 11)

Commissioning

Fig. 8

By-pass screw

When the hob has been fully installed it will be

necessary to check the minimum flame setting.

To do this, follow the procedure below.

- Turn the gas tap to the MAX position and ignite.

- Set the gas tap to the MIN flame position then

turn the control knob from MIN to MAX several

times. If the flame is unstable or is extinguished

follow the procedure below.

Procedure:

Re-ignite the burner and set to MIN.

Remove the control knob, insert a thin

bladed screwdriver down the centre of

the gas tap control shaft and turn the

adjustment screw until the flame is steady

and does not extinguish, when the knob

is turned from MIN to MAX. Repeat this

procedure for all burners.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

Zanussi ZGG659ICX Manuel d'utilisateur Page 11