Zanussi ZGU76534XA Manuel d'utilisateur

GETTING STARTED?EASY.User ManualZGU76534XAEN User ManualHobIL

If after some tries the burner does notlight, check if the crown and its capare in correct positions.WARNING! Do not keep the controlknob pushed for m

CARE AND CLEANINGWARNING! Refer to Safety chapters.GENERAL INFORMATION• Clean the hob after each use.• Always use cookware with a clean base.• Scratch

Problem Possible cause Remedy The fuse is blown. Make sure that the fuse is thecause of the malfunction. If thefuse is blown again and again,contact

TECHNICAL DATAHOB DIMENSIONSWidth 745 mmDepth 515 mmOTHER TECHNICAL DATATOTAL POW-ER:Gas original: G30/G31 (3B/P) 30/30 mbar 756 g/hElectric supply: 2

14

15

WWW.ZANUSSI.COM/SHOP867329583-B-362018

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

• NEVER try to extinguish a fire with water, but switch off theappliance and then cover flame e.g. with a lid or a fire blanket.• CAUTION: The cooking

• Do not install the appliance adjacent to a dooror under a window. This prevents hot cookwarefalling from the appliance when the door or thewindow is

• Used oil, that can contain food remnants, cancause fire at a lower temperature than oil usedfor the first time.• Do not put flammable products or it

GAS CONNECTIONWARNING! The following instructionsabout installation, connection andmaintenance must be carried out byqualified personnel in compliance

• Always use a correctly installed shockproofsocket.• Make sure that there is an access to the mainsplug after the installation.• Do not pull the main

6.CAUTION! Install the appliance onlyon a worktop with flat surface.POSSIBILITIES FOR INSERTIONThe panel installed below the hob must be easy toremove

CONTROL KNOBSymbol Descriptionno gas supply / off positionignition position / maximumgas supplySymbol Descriptionminimum gas supplyDAILY USEWARNING! R