
Clock function Application
Minute Minder To set a countdown time. An acoustic signal sounds after the time period
is completed. This function has no effect on the operation of the
oven.
Duration To set how long the appliance must operate.
End To set when the appliance must be deactivated.
You can use Duration and End at
the same time to set the time when the ap-
pliance must be activated and then deactivated.
First set Duration
, then End .
Setting the clock functions
1.
For Duration
and End , set an oven
function and temperature. This is not nec-
essary for the Minute Minder
.
2. Press the Selection button again and again
until the indicator for the necessary clock
function flashes.
3. Press + or - to set the necessary clock
function.
The display shows the indicator for the
clock function you set. When the set time
ends, the indicator flashes and an acoustic
signal sounds for two minutes.
With the Duration
and End func-
tions, the appliance deactivates automati-
cally.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions and
the knob for the temperature to the off po-
sition.
Cancelling the clock functions
1. Press the Selection button again and again
until the necessary function indicator flash-
es.
2. Press and hold the button -.
The clock function goes out after some
seconds.
Oven - Using the accessories
Warning! Refer to "Safety information"
chapter.
Grilling set
The grilling set includes the roasting pan grid
and the deep roasting pan. You can use the
roasting pan grid on the two sides.
Warning! Risk of burns when removing
the accessories from a hot oven.
10
www.zanussi.com
Commentaires sur ces manuels