Zanussi ZEV6741FBA Manuel d'utilisateur télécharger pdf (Page 13)

Problem Possible cause Remedy

and a number come on.

There is an error in the hob. Deactivate the hob and acti-

vate it again after 30 seconds.

If comes on again, discon-

nect the hob from the electrical

supply. After 30 seconds, con-

nect the hob again. If the prob-

lem continues, speak to an Au-

thorised Service Centre.

You can hear a constant beep

noise.

The electrical connection is in-

correct.

Disconnect the hob from the

electrical supply. Ask a quali-

fied electrician to check the in-

stallation.

comes on.

The second phase of the pow-

er supply is missing.

Check if the hob is correctly

connected to the electrical

supply. Remove the fuse, wait

one minute, and insert the fuse

again.

IF YOU CANNOT FIND A SOLUTION...

If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service

Centre. Give the data from the rating plate. Give

also three digit letter code for the glass ceramic (it

is in the corner of the glass surface) and an error

message that comes on. Make sure, you operated

the hob correctly. If not the servicing by a service

technician or dealer will not be free of charge, also

during the warranty period. The instructions about

the Service Centre and conditions of guarantee are

in the guarantee booklet.

TECHNICAL DATA

RATING PLATE

Model ZEV6741FBA PNC 949 595 654 01

Typ 60 HAD 03 AO 220 - 240 V 50 - 60 Hz

Made in Germany

Ser.Nr. ................. 6.4 kW

ZANUSSI

COOKING ZONES SPECIFICATION

Cooking zone

Nominal Power (Max heat setting)

[W]

Cooking zone diameter [mm]

Left front 750 / 2200 120 / 210

Left rear 1200 145

Right front 1200 145

Right rear 1800 180

1 2 ... 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Zanussi ZEV6741FBA Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Zanussi ZEV6741FBA