Zanussi ZWY51024CI Manuel d'utilisateur télécharger pdf (Page 12)

ACTIVATING THE APPLIANCE

Press and hold the On/Off button to activate or

deactivate the appliance.

A tune sounds when the appliance is activated.

SETTING A PROGRAMME

1. Touch the programme button and set the

programme:

• The indicator of the button flashes

slowly.

2. If necessary, change the temperature and the

spin speed or add available options. When you

activate an option, the indicator of the set

option comes on.

If you set something incorrect, the

indicator of the button flashes red

three times.

STARTING A PROGRAMME WITHOUT THE

DELAY START

Touch the button .

• The indicator of the button stops to

flash and stays on.

• The programme starts, the lid locks, the

indicator is on.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

STARTING A PROGRAMME WITH THE DELAY

START

The start of the programme can be delayed by 9, 6

or 3 hours.

1. Touch the button

to choose the delay you

want to set.

The indicator of the selected delay is on.

2. Touch the button :

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the delay start before you touch the

button . After touching the button

you can only cancel the delay.

To cancel the delay start:

1. Touch the button

to set the appliance to

pause.

2. Touch the button until the indicator of the

set delay goes off.

Touch the button again to start the

programme immediately.

INTERRUPTING A PROGRAMME AND

CHANGING THE OPTIONS

You can change only some options before they

operate.

1. Touch .

The indicator of this button flashes.

2. Change the options.

3. Touch again.

The programme continues.

CANCELLING A PROGRAMME

1. Press the button for some seconds to

cancel the programme and to deactivate the

appliance.

2. Press the same button again to activate the

appliance. Now, you can set a new washing

programme.

Before starting the new programme

the appliance could drain the water. In

this case, make sure that the detergent

is still in the detergent compartment, if

not fill the detergent again.

OPENING THE LID

While a programme or the delay start operates, the

appliance lid is locked. The indicator is on.

CAUTION! If the temperature and

level of the water in the drum are too

high, you cannot open the lid.

Open the lid during the first 10 minutes of the

cycle and when the delay start operates:

1. Press the to pause the appliance.

2. Wait until the lid lock indicator goes off.

3. You can open the lid.

4. Close the lid and press the again. The

programme (or the delay start) continues.

Open the lid when the programme operates:

1. Turn the programme knob to position On/Off to

deactivate the appliance.

2. Wait for some minutes and then open the

appliance lid.

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Commentaires sur ces manuels

Pas de commentaire