Zanussi ZRB23200XA Manuel d'utilisateur télécharger pdf (Page 22)

www.zanussi.com

Problem Possible cause Solution

Unusual noises Appliance is not level. Re-adjust the feet.

The appliance is touching the

wall or other objects.

Move the appliance slightly.

A component, e.g. a pipe, on the

rear of the appliance is touching

another part of the appliance or

the wall.

It necessary, caretully move the

component out of the way.

The compressor does not start

immediately after changing the

temperature setting.

This is normal, no error has

occurred.

The compressor will start after a

period of time.

If the malfunction shows again, contact the

Service Center.

Below data are necessary to help you quickly

and correctly. Write the necessary data here,

refer to the rating plate.

Model description ................................................

(Mod.)

Produkt number ................................................

(PNC)

Serial number ................................................

(S.N.)

Replacing the lamp

Caution! Before replacing the lamp,

disconnect the appliance from mains

power supply.

Failure to do so could result in electrical

shock or personal injury.

Follow below process to replace the lamp:

1. Use the cross screw driver to take the

screws out.

2. Remove the light cover.

3. Light Bulb-screw out the bulb ac-

cording to the direction shown in the

picture

4. Replace with a 10 watt-refrigerator bulb

that is of the same shape and size.

5. Replace the light cover.

Technical information

For further technical information please refer to the rating on the internal left side

of the appliance and in the energy label.

Dimensions

Height mm 1687

Width mm 558

Depth mm 613

Rising time hours 10

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Zanussi ZRB23200XA Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Congélateurs Zanussi ZRB23200XA