Zanussi ZMC40STX Manuel d'utilisateur télécharger pdf (Page 42)

INSTALLATION

Position A

Position C

Position B

Conventional

oven

The microwave can be fitted in position A, B or C:

POSITION NICHE SIZE CHIMNEY Gap Between

W D H (min) Cupboard & Ceiling

A 560x550x450 20 50

B 560x550x450 20 50

C 560x550x460 20 Not Applicable

Measurements in (mm)

INSTALLING THE APPLIANCE

1. Remove all packaging and check carefully for

any signs of damage.

2. If the microwave is fitted in position C, ensure that

the minimum air gaps are maintained as shown in

the diagram.

3. Secure four cupboard retention blocks in position

using the setting template (TMAPTA004URR0).

4. Fit the appliance into the kitchen cupboard, lift

over the bottom/front blocks then push slowly,

and without force, until the front frame of the oven

seals against the front opening of the cupboard.

5. Ensure the appliance is stable and not leaning.

6. Fix the oven in position with the screws provided.

The fixing points are located within the louvre

areas at the top and bottom of the oven (see

diagram, item 1, on page 5).

7. Fit the frame fastner caps to the four fixing

positions (2 spare caps are provided).

8. It is important to ensure that the installation of this

product conforms to the instructions in this

operation manual and the conventional oven or

hob manufacturer’s installation instructions.

65 mm

5 mm

460 mm

20 mm

min. 20 mm

450 mm

Conventional

oven

Position A

Position C

min. 20 mm

450 mm

Position B

Chimney

Cable clip

Chimney

Cable clip

1. ZD-91D-UK ENGLISH 10/02/2005 11:49 Page 40

1 2 ... 37 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire

Zanussi ZMC40STX Manuel d'utilisateur Page 42

Commentaires sur ces manuels

Produits connexes et manuels pour Micro-ondes Zanussi ZMC40STX