Zanussi ZOB995XL Manuel d'utilisateur télécharger pdf (Page 37)

electrolux 37

Grill heating element

This model has been fitted with a hinged grill ele-

ment to make the roof of the oven especially easy

to clean.

Before proceeding ensure the oven

is cool and disconnected from the

electricity supply.

1) Undo the screw fastening the grill element (see

Fig). When carrying out this operation for the

first time, we recommend using a screwdriver.

2) Then gently pull the grill downwards to allow

access to the oven roof (see Fig).

3) Clean the oven roof with a suitable cleaner

and wipe dry before returning the hinged grill

element to its original position.

4) Carefully push the grill element up into its origi-

nal position and re-tighten the retaining nut.

Ensure the retaining nut on the grill

element is properly tightened so that

it does not fall down when in use.

Telescopic pull-out shelf supports

The side rails with telescopic pull-out shelf supports

can be completely removed for cleaning.

Removal

Take hold of the side rails on one side of the oven and

undo the knurled nut at the front. Lift the side rails at the

back in order to unhook them (see diagram).

Do the same thing on the other side of the oven.

Cleaning

Clean the two sets of side rails with telescopic shelf

supports on the outside only with commercially

available detergents.

The telescopic shelf supports must not be

cleaned in the dishwasher.

Attention, the rollers must not be greased.

Insertion

After cleaning, first insert the dry side rails with the hook

into the hole at the back, then fasten at the front with the

knurled nut.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Pas de commentaire

Zanussi ZOB995XL Manuel d'utilisateur Page 37