Zanussi ZWT71201WA Manuel d'utilisateur télécharger pdf (Page 22)

Problem Possible solution

The washing results are

not satisfactory.

• Increase the detergent quantity or use a different detergent.

• Use special products to remove the stubborn stains before you

wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

You cannot set an option. • Make sure that you press only the wanted button(s).

The machine does not dry

or does not dry properly:

• Make sure that you have set a suitable drying programme for your

laundry.

• Make sure that you set the correct the drying time or dryness de-

gree.

• Make sure that the water tap is not turned on.

• the drain filter is not clogged.

• Make sure you have not overloaded the appliance.

The laundry is full of differ-

ent coloured fluff:

The fabrics washed in the previous cycle released fluff of a different

colour.

• Clean the clothes with a fluff remover

• The drying phase helps to eliminate some fluff.

In case of an excessive amount of fluff in the drum, refer to section

«FLUFF IN THE FABRICS».

• Thoroughly clean the empty drum, the gasket and the door with a

wet rag.

• Perform a rinse cycle.

• Put a wool or piled fabric rag inside the drum.

• Perform a drying cycle of 10 minutes.

• Remove the old wool cloth.

Now you can wash other garments.

After the check, activate the appliance. The

programme continues from the point of interruption.

If the problem occurs again, contact the Authorised

Service Centre.

If the display shows other alarm codes. Deactivate

and activate the appliance. If the problem

continues, contact the Service.

SERVICE

We recommend the use of original spare parts.

When contacting the Authorised Service Centre,

make sure that these data are available. You can

find the information on the rating plate: model, PNC

and Serial Number. (Mod., Prod. No., Ser. No.)

INSTALLATION

WARNING! Refer to Safety chapters.

UNPACKING

Remove all transit bolts and packing

before you use the appliance. You are

advised to keep all transit devices so t

hat they can be refitted if the appliance

ever has to be transported again.

• After removing all the

packaging, carefully

lay the appliance on

it’s back to remove

the polystyrene base

from the bottom.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Zanussi ZWT71201WA Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Séchoirs à tambour Zanussi ZWT71201WA