Zanussi ZWY51004WA Manuel d'utilisateur télécharger pdf (Page 10)

• The indicator of the button flashes

slowly.

2. If necessary, change the temperature and

the spin speed or add available options.

When you activate an option, the indicator

of the set option comes on.

If you set something incorrect, the

indicator of the button flashes

red three times.

Starting a programme without the delay

start

Touch the button .

• The indicator of the button stops to

flash and stays on.

• The programme starts, the lid locks, the

indicator is on.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

Starting a programme with the delay

start

The start of the programme can be delayed by

9, 6 or 3 hours.

1. Touch the button

to choose the delay

you want to set.

The indicator of the selected delay is on.

2. Touch the button :

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the delay start before you touch the

button . After touching the

button you can only cancel the

delay.

To cancel the delay start:

1. Touch the button to set the appliance

to pause.

2. Touch the button until the indicator of

the set delay goes off.

Touch the button again to start the

programme immediately.

Interrupting a programme and changing

the options

You can change only some options before they

operate.

1. Touch .

The indicator of this button flashes.

2. Change the options.

3. Touch again.

The programme continues.

Cancelling a programme

1. Press the button for some seconds to

cancel the programme and to deactivate the

appliance.

2. Press the same button again to activate the

appliance. Now, you can set a new washing

programme.

The appliance does not drain the

water. The water left in a drum can

be used for the next washing cycle.

Opening the lid

While a programme or the delay start operates,

the appliance lid is locked. The indicator

is

on.

CAUTION!

If the temperature and level of the

water in the drum are too high, you

cannot open the lid.

To open the lid during the first minutes of

the cycle or when the delay start operates:

1. Touch the button

to pause the

appliance.

2. Wait a couple of minutes until the indicator

goes off.

1)

3. You can open the lid.

4. Close the lid and touch the button

again. The programme (or the delay start)

continues.

At the end of the programme

• The appliance stops automatically.

• The acoustic signal operates (if it is

activated).

1) The indicator blinks when the lid is unlocking.

10 www.zanussi.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Commentaires sur ces manuels

Pas de commentaire