Zanussi ZDT22003FA Manuel d'utilisateur télécharger pdf (Page 8)

By default, AirDry is activated with all programmes excluding (if applicable) but it is possible to

deactivate it.

While the drying phase operates, the device opens the appliance door. The door is then kept

ajar.

While the appliance is in user mode, within about 5 seconds:

1. Press the programme button twice.

• The indicators and are on.

• The indicator flashes.

2. Wait until the indicators and are off.

• The indicator is on = AirDry is activated.

3. Press the programme button to change the setting.

• The indicator is off = AirDry is deactivated.

4. Press the on/off button to confirm the setting.

CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as

opening the door may pose a danger.

BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the hardness

of the water supply. If not, adjust the level

of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance.

Do not use detergent and do not load the

baskets.

After starting a programme, it may take up to 5

minutes for the appliance to recharge the resin in

the water softener. It seems that the appliance is

not working. The washing phase starts only after

this procedure is completed. The procedure is

repeated periodically.

ADDING SALT

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Zanussi ZDT22003FA Manuel d'utilisateur Page 8