Zanussi ZDT22003FA Manuel d'utilisateur télécharger pdf (Page 9)

Before the first use, put one litre of water in the salt container.

CAUTION!

Water and salt can come out of the salt container during filling. To prevent corrosion, start a programme

immediately after filling the salt container.

ADDING RINSE AID

The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot

rinse phase.

DAILY USE

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in programme

selection mode.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill the rinse

aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme for the

type of load and the degree of soil.

ADDING DETERGENT

If the programme has a prewash phase, put a small quantity of detergent also in compartment B.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Pas de commentaire

Zanussi ZDT22003FA Manuel d'utilisateur Page 9