Zanussi ZGG96624XA Manuel d'utilisateur

GETTING STARTED?EASY.User ManualZGG96624XAEN User ManualHobEG

LABELS SUPPLIED WITH THE ACCESSORIESBAGStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.03

A B CA. End of shaft with nutB. Washer supplied with the applianceC. Elbow supplied with the applianceLiquid gasUse the rubber pipe holder for liquid

ground connection agrees with the standardsand regulations.• Do not let the power cable to heat up to atemperature higher than 90° C.Make sure that yo

ABA) supplied sealB) supplied brackets9.10.CAUTION! Install the appliance onlyon a worktop with flat surface.POSSIBILITIES FOR INSERTIONThe panel inst

BURNER Ø BYPASS 1/100 mmSemi-rapid 32Auxiliary 28OTHER TECHNICAL DATATOTAL POWER:Gas original: G20 (2H) 20 mbar 13 kWGas replace-ment:G30 (3+) 28-30 m

ENVIRONMENTAL CONCERNSRecycle materials with the symbol . Put thepackaging in relevant containers to recycle it. Helpprotect the environment and huma

WWW.ZANUSSI.COM/SHOP867329728-B-042018

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

• NEVER try to extinguish a fire with water, but switch off theappliance and then cover flame e.g. with a lid or a fire blanket.• CAUTION: The cooking

• Do not install the appliance adjacent to a dooror under a window. This prevents hot cookwarefalling from the appliance when the door or thewindow is

• Used oil, that can contain food remnants, cancause fire at a lower temperature than oil usedfor the first time.• Do not put flammable products or it

PRODUCT DESCRIPTIONCOOKING SURFACE LAYOUT452131Rapid burner2Auxiliary burner3Semi-rapid burner4Triple Crown burner5Control knobsCONTROL KNOBSymbol Des

IGNITION OF THE BURNERAlways light the burner before you puton the cookware.WARNING! Be very careful when youuse open fire in the kitchenenvironment.

CAUTION! Make sure that pothandles are not above the front edgeof the cooktop.CAUTION! Make sure that the potsare placed centrally on the burner inord

• Remove when the hob is sufficiently cool:limescale rings, water rings, fat stains, shinymetallic discoloration. Clean the hob with amoist cloth and