Zanussi ZHI60111G Manuel d'utilisateur télécharger pdf (Page 13)

Venting

The hood is more effective when used in the

extraction setting (ducted to the outside).

Venting kits may be purchased through your

retailer or DIY store, and must be ducted to

an outside vent of 100mm (4”) minimum.

The ducting used must be manufactured from

re retardant material which should conform to

the relevant British Standard or DIN4102-B1.

When the hood is ducted externally the

charcoal lter must be removed and the

slider control must be in the ducting position.

To Fit the Ducting

When installing the ducted version, connect the hood to

the chimney using either a exible or rigid pipe ø120 mm,

the choice of which is left to the installer.

1 Fix the pipe in position using sufcient pipe clamps

(not supplied).

2 Remove any activated charcoal lters.

Recirculation

The charcoal lter must be

tted for recirculation and the slider control

must be in the recirculation position.

Fitting the Cooker Hood to the Wall

1 Make sure that the hood body has been completely

xed.

2 Make sure that hood is equipped with charcoal

lters.





Ø 100

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

Zanussi ZHI60111G Manuel d'utilisateur Page 13