Zanussi ZDT420 Manuel d'utilisateur

ENUser manual 2DishwasherZDT420

12Use the cutlery grid. If the dimensions of the cutleryprevent use of the cutlery grid, remove it.1Arrange the items to letwater touch all surfaces.2

123Fill the detergent dispens-er (A) with detergent.4If you use a washing pro-gramme with prewashphase, put more detergentin the prewash detergentcomp

12Fully clean the filters A, Band C below running wa-ter.3To remove filters B and C,turn the handle approxi-mately 1/4 anticlockwise.4Remove the flat

Fault code and malfunction Possible cause and solution• intermittent audible signal•digital display shows The dishwasher does not fill with water• The

The cleaning results are not satisfactoryThe dishes are not clean • The selected washing programme is not applicable for the type of load andsoil.• Th

Warning! To discard the appliance, follow theprocedure:• Pull the mains plug out of the socket.• Cut off the mains cable and mains plug and discardth

34The internal diameter must not be smaller than the diam-eter of the hose.If you connect the water drain hose to a trap spigot underthe sink, remove

17

18

19

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Washing programmes _ _ _ _ _ _ _ _

To buy accessories, consumables and spare parts at our online shop please visit:www.zanussi.co.ukwww.zanussi.com156951920-052009

• Do not change the specifications or modify this prod-uct. Risk of injury and damage to the appliance.• Do not use the appliance:– if the mains cable

• Remaining time to the end of the programme.• End of a washing programme.• Number of hours in delay start.• Fault codes.• Activation/deactivation of

Washing programmesWashing programmesProgramme Degree of soil Type of load Programme description Half-load option1 RINSE ANDHOLDAny Partial load (to be

Consumption valuesProgrammeDuration (in minutes) 1)Energy (in kWh) Water (in litres)1 RINSE AND HOLD 12 0,1 42 INTENSIVE 80-90 1,6-1,8 22-243 AUTOMATI

Water hardness Water hardness setting°dH °TH mmol/l Clarke manually electronically23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 619 - 22 33 - 39 3,3 - 3,9 23 -

3Fill the salt container with1 litre of water (only thefirst operation).456It is normal that water overflows from the salt con-tainer when you fill it

Caution! Do not fill the rinse aid dispenser withother products (e.g. dishwasher cleaning agent,liquid detergent). There is a risk of damage to theap