Zanussi ZFT610W Manuel d'utilisateur

ENUser manualFreezerZFT610WZFT610X

LevellingWhen placing the appli-ance ensure that it standslevel. This can be ach-ieved by two adjustablefeet at the bottom in front(2). If necessary a

1. Remove the plug fromthe power socket.2. Tilt back the appliancecarefully so that the com-pressor cannot touch thefloor.3. Unscrew the adjustablefee

5Blue: NeutralAs the colours of the wires in the mains lead of this appli-ance may not correspond with the coloured markingsidentifying the terminals

13

14

15

www.zanussi.com/shop 200383340-00-25112009

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4First use _ _ _ _ _ _ _ _ _ _

or damaged power plug may overheat and cause afire.3. Make sure that you can come to the mains plug ofthe appliance.4. Do not pull the mains cable.5.

• This product must be serviced by an authorized ServiceCentre, and only genuine spare parts must be used.Environment ProtectionThis appliance does no

However, the exact setting should be chosen keeping inmind that the temperature inside the appliance dependson:• room temperature• how often the door

Helpful Hints and TipsNormal Operating Sounds• You may hear a faint gurgling and a bubbling soundwhen the refrigerant is pumped through the coils ortu

casing of this appliance is only cleaned with warm waterwith a little washing-up liquid added.After cleaning, reconnect the equipment to the mains sup

Problem Possible cause SolutionThe appliance is noisy The appliance is not supported prop-erlyCheck if the appliance stands stable (allthe four feet s

Problem Possible cause SolutionThe appliance does not cool atallPlug is not connected to the mainssocket properlyConnect the mains plug properly Ther