Zanussi ZGG66424XV Manuel d'utilisateur

GETTING STARTED?EASY.User ManualZGG66424XVEN User ManualHobIL

2. Keep the control knob pushed for equal or lessthan 10 seconds. This lets the thermocouplewarm up. If not, the gas supply is interrupted.3. Adjust t

BurnerDiameter of cook-ware (mm)Semi-rapid (rear) 120 - 220BurnerDiameter of cook-ware (mm)Auxiliary 80 - 180CARE AND CLEANINGWARNING! Refer to Safety

WHAT TO DO IF...Problem Possible cause RemedyThere is no spark when you tryto activate the spark generator.The hob is not connected to anelectrical su

C. Stick it on instruction booklet.TECHNICAL DATAHOB DIMENSIONSWidth 594 mmDepth 510 mmOTHER TECHNICAL DATATOTAL POW-ER:Gas original: G30/G31 (3B/P) 3

14

15

WWW.ZANUSSI.COM/SHOP867329625-C-492018

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

• CAUTION: The cooking process has to be supervised. A shortterm cooking process has to be supervised continuously.• WARNING: Danger of fire: Do not s

• The bottom of the appliance can get hot. Makesure to install a non-combustible separationpanel under the appliance to prevent access tothe bottom.EL

WARNING! Risk of damage to theappliance.• Do not keep hot cookware on the control panel.• Do not let cookware to boil dry.• Be careful not to let obje

Make sure that the gas supplypressure of the appliance obeys therecommended values. The adjustableconnection is fixed to thecomprehensive ramp by mean

Make sure that you connect the blueneutral cable to the terminal with aletter "N" on it. Connect the brown (orblack) phase cable to the term

ABA) supplied sealB) supplied brackets8.9.CAUTION! Install the appliance onlyon a worktop with flat surface.POSSIBILITIES FOR INSERTIONThe panel insta

CONTROL KNOBSymbol Descriptionno gas supply / off positionignition position / maximumgas supplySymbol Descriptionminimum gas supplyDAILY USEWARNING! R