Zanussi ZDP7203P Manuel d'utilisateur télécharger pdf (Page 27)

Problem Possible solution

The appliance door does not close. Make sure that the installation of the filter is cor-

rect.

Make sure that the laundry does not catch between

the appliance door and the rubber seal.

The appliance stops during operation. Make sure that the water container is empty. Press

Start/Pause to start the programme again.

The display shows a long programme duration.

Make sure that the weight of the laundry is applica-

ble to the duration of the programme.

Make sure that the filter is clean.

The laundry is too wet. Spin the laundry in the

washing machine again.

Make sure that the room temperature is not too

warm.

The display shows a short programme duration. Set the Time Drying or the Extra Dry programme.

The display shows Err. If you want to set a new programme, deactivate

and activate the appliance.

Make sure that the options are applicable to the

programme.

The display shows (e.g. E51). Deactivate and activate the appliance. Start a new

programme. If the problem occurs again, contact

the Service.

1) After maximum 5 hours, the programme ends automatically

If the drying results are not satisfactory

• The set programme was incorrect.

• The filter is clogged.

• The condenser is clogged.

• There was too much laundry in the

appliance.

• The drum is dirty.

• Incorrect setting of the conductivity sensor.

• The airflow slots are clogged.

Technical Data

Height x Width x Depth 850 x 600 x 540 mm (maximal 610 mm)

Max. depth with the appliance door open 1030 mm

Max. width with the appliance door open 950 mm

Adjustable height 850 mm (+ 15 mm - feet regulation)

Drum volume 104 l

Maximum load volume 7 kg

www.zanussi.com 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Pas de commentaire

Zanussi ZDP7203P Manuel d'utilisateur Page 27